Repair loop Restarting into repair again?

Automatic repair loop fix that breaks the cycle

Windows tries Automatic Repair, fails, restarts and tries again. The usual causes are damaged startup files or an update that didn't finish. Boot Restorer runs outside Windows, repairs the startup files, rolls back the unfinished update and gets you out of the loop.

Windows 10 & 11 No reinstall Files untouched
Cause 1
Startup filesrepaired
Cause 2
Unfinished updaterolled back
Also checks
BCD & boot recordsin one pass
Runs from
USB rescue menuoutside the loop
The loop

Why the automatic repair loop happens

Windows' own repair runs inside the same startup that's broken.

  • What you see“Preparing Automatic Repair” or “Diagnosing your PC”, then a restart, over and over.
  • Startup filesA damaged startup file stops Windows loading, and Automatic Repair can't replace it.
  • Unfinished updateAn update that stopped partway leaves Windows half changed.
  • Boot configurationA damaged BCD can send the PC back into recovery each time.
  • Getting outWork from outside the loop: the recovery Command Prompt plus a tool that can repair those files.
How it works

Break the repair loop in four steps

01

Get to a command prompt

In the recovery screens choose the Command Prompt, or boot a Windows installation USB if the loop won't let you in.

02

Start Boot Restorer

Run BOOTRESTORER.CMD from the recovery USB to open the rescue menu.

03

Diagnose the loop

Guided mode checks the startup files, the BCD and boot records, and flags an unfinished update.

04

Repair and restart

Apply the fix: repair startup files, roll back the update or rebuild the BCD. A backup is saved first.

Why Boot Restorer

Why Boot Restorer

Startup files and loops

Repairs damaged startup files, stops the “Preparing Automatic Repair” loop, rolls back an unfinished update and can start Windows in safe mode.

Startup

Guided “PC won't start” mode

Checks the boot configuration, the EFI or boot manager files, the boot records and the startup files, explains what it found in plain English and offers the matching fix.

Guided

BCD and EFI repair

Rebuilds a missing or damaged boot configuration and repairs the EFI boot files on UEFI PCs, including after a clone left them on the old drive.

BCD / EFI

Copy files off first

Copies documents and photos to a USB drive from Boot Restorer or its rescue menu, before you repair anything. Repairs never touch your files.

Your files

Backup and one-click undo

Back up your boot files while the PC works. Every repair saves a backup first, so any repair can be undone in one click.

Undo

Recovery USB and rescue menu

Puts your boot backup, a rescue menu and Boot Restorer itself on any USB stick. Run it from Windows' recovery Command Prompt or an installation USB, with no internet needed.

Recovery USB

Who it's not for: Mac and Linux users. Boot Restorer runs on 64-bit Windows 10 and 11 and repairs Windows startup only.

Pricing

One license. No subscription.

Boot Restorer 10.26
$49.95

One-time payment · instant download

  • PlatformWindows 10 & 11 (64-bit)
  • Activations1 PC
  • UpdatesFree
  • Activations1 PC
  • Deliverydownload + key by email

Get Boot Restorer

You'll go straight to your download page once payment is confirmed, and we'll email your download link and installation key.

Buy license · $49.95
Secured by Stripe
Instant download
License key emailed
No subscription

Already bought it? Re-download or recover your key.

FAQ

Automatic repair loop questions

Why does Windows keep going into Automatic Repair?
Usually because startup files are damaged or an update didn't finish. Automatic Repair runs inside the same broken startup, so it can fail every time.
Can I fix the loop without reinstalling?
Usually, yes. Boot Restorer repairs the startup files or rolls back the unfinished update, which gets Windows starting with your programs and files intact. Nothing needs setting up again.
How do I get out of the loop to run a tool?
Open the Command Prompt from the recovery screens, or start from a Windows installation USB, then run Boot Restorer's rescue menu from its recovery USB.
What if the loop was caused by a driver?
Boot Restorer can start Windows in safe mode, where you can remove the faulty driver. Remove the driver you installed just before the loop started, then restart Windows normally. Your files aren't affected.
Are my files safe during the repair?
Yes. Repairs don't touch your files, and you can copy documents and photos to a USB drive from the rescue menu first. That's optional, but useful peace of mind.
Keep reading

More from Boot Restorer

Out of the repair loop

Startup files fixed, unfinished update rolled back.

Buy license · $49.95